Thursday, January 8, 2015

LED Floodlight For Planted Tank

Using 20W LED floodlight for my 1ft tank. It is very easy to do, everyone should be able to DIY, just need to extent the wire to the wall socket. On second thought, I should not classify it as DIY :p

PAR reading for various light on the same tank:
20W LED 15cm from water surface.
- 1cm above water: ~201 umol
- water surface: ~169 umol (sensor fully submerge)
- 20cm below water: ~66 umol

6.5W LED WEIPRO 7cm from water surface.(120 small LED inside)
- 1cm above water: ~67 umol
- water surface: ~55 umol (sensor fully submerge)
- 20cm below water: ~18 umol

55W PL Aquasonic Fluorescent 7cm from water surface.
- 1cm above water: ~267 umol
- water surface: ~244 umol (sensor fully submerge)
- 20cm below water: ~76 umol

Comparing all 3 lights, WEIPRO 6.5W LED is pretty much useless for planted tank. I surprise ho fast the PAR reading drop on the Fluorescent light, at the bottom surface it is pretty much same intensity as 20W LED. It is not practical but just for curiosity, I measure 7cm under 20W LED and PAR reading was 558umol.

You can also do something like below which my friend did on his 3ft tank



2 comments:

  1. Hi, May I know where you can get the PAR meter in Singapore? How much would it cost?

    ReplyDelete
    Replies
    1. I bought mine during Aquarama 2013, I remember Seneye reef was about $150. Just wait for few month for Aquarama 2015 and you can get yours.

      Delete